1926 - Table of Contents 1926 Subpart A - General 1926.1 - Purpose and scope. 1926.2 - Variances from safety and health standards. 1926.3 - Inspections - right of entry. 1926.4 - Rules of practice for administrative adjudications for enforcement of safety and health standards.

OSHA enforces its regulations and standards by conducting inspections based on priority such as an imminent danger situation, fatality, or a worker complaint. Current workers or their representatives may file a written complaint and ask OSHA to inspect their workplace if they believe there is a serious hazard or that their employer is not ...

To protect workers exposed to respirable crystalline silica, OSHA has issued two respirable crystalline silica standards: one for construction, and the other for general industry and maritime. Revisions to Table 1

1926.32 - Definitions. Part Number: 1926; Part Number Title: Safety and Health Regulations for Construction ... e-CFR. The following definitions shall apply in the application of the regulations in this part: 1926.32(a) Act means section 107 of the Contract Work Hours and Safety Standards Act, commonly known as the ... (OSHA) TTY . www.OSHA.gov ...

of frequently cited OSHA standards in the construction industry. This publication does not alter or determine ... Subpart M can be found in Title 29 Code of Federal Regulations ... 29 CFR 1926.500, 29 CFR 1926.501, 29 CFR 1926.502, and 29 CFR 1926.503. OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION 2 What are Employers’ Responsibilities to ...

1926.600(a)(6)(vii)(B) Ground jumper cables shall be attached to materials being handled by boom equipment when electrical charge is induced while working near energized transmitters. Crews shall be provided with nonconductive poles having large alligator clips or other similar protection to attach the ground cable to the load.

1926 Subpart X - Stairways and Ladders; Part Number: 1926; Part Number Title: Safety and Health Regulations for Construction; Subpart: 1926 Subpart X; Subpart Title: Stairways and Ladders; Standard Number: 1926 Subpart X ... 800-321-6742 (OSHA) TTY . www.OSHA.gov. Federal Government. White House;

Aug 03, 2015 · OSHA will continue to publish new guidance products in the coming months, and will post them here. Please check the website often for updates. Construction workers often perform tasks in confined spaces - work areas that (1) are large enough for an employee to enter, (2) have limited means of entry or exit, and (3) are not designed for ...

Determine if any part of the equipment, load line, or load (including rigging and lifting accessories), could get closer than the minimum clearance distance to the power line permitted under Table A (see § 1926.1408).If so, then the employer must follow the requirements in paragraph (b) of this section to ensure that no part of the equipment, load line, or load (including rigging and lifting ...

[29 CFR 1926.451(f)(5)]. Note: To move mobile scaffolds, see 29 CFR 1926.452(w). Pole scaffolds over 60 feet in height must be designed by a registered professional engineer, and shall constructed and loaded according to that design. [29 CFR 1926.452(a)(10)].